Format:
2x3
Model:
Straight
technical informationSku:
13976-2
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13973-2 and 13971-2)
Model: Straight
Contents: 6 hangers (4 upper with magnetic + 2 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Straight
Contents: 6 hangers (4 upper with magnetic + 2 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
Format:
3x3
Model:
Straight
technical informationSku:
13976-3
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13973-3 and 13971-3)
Model: Straight
Contents: 8 hangers (5 upper with magnetic + 3 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Straight
Contents: 8 hangers (5 upper with magnetic + 3 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
Format:
4x3
Model:
Straight
technical informationSku:
13976-4
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13973-4 and 13971-4)
Model: Straight
Contents: 10 hangers (6 upper with magnetic + 4 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Straight
Contents: 10 hangers (6 upper with magnetic + 4 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
Format:
5x3
Model:
Straight
technical informationSku:
13976-5
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13973-5 and 13971-5)
Model: Straight
Contents: 12 hangers (7 upper with magnetic + 5 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Straight
Contents: 12 hangers (7 upper with magnetic + 5 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
Format:
2x3
Model:
Curved
technical informationSku:
13975-2
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13972-2 and 13974-2)
Model: Curved
Contents: 6 hangers (4 upper with magnetic + 2 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Curved
Contents: 6 hangers (4 upper with magnetic + 2 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
Format:
3x3
Model:
Curved
technical informationSku:
13975-3
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13972-3 and 13974-3)
Model: Curved
Contents: 8 hangers (5 upper with magnetic + 3 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Curved
Contents: 8 hangers (5 upper with magnetic + 3 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
Format:
4x3
Model:
Curved
technical informationSku:
13975-4
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13972-4 and 13974-4)
Model: Curved
Contents: 10 hangers (6 upper with magnetic + 4 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Curved
Contents: 10 hangers (6 upper with magnetic + 4 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
Format:
5x3
Model:
Curved
technical informationSku:
13975-5
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
Compatibility: Newport Pop-Up (Ref. 13972-5 and 13974-5)
Model: Curved
Contents: 12 hangers (7 upper with magnetic + 5 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Model: Curved
Contents: 12 hangers (7 upper with magnetic + 5 lower)
Fixing type: Double-sided adhesive
Indoor use: Yes
Outdoor use: No
Length of upper front hangers: 730 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Length of upper side hangers: 670 mm
Length of lower hangers: 700 mm
Main material: Plastic
Secondary material: Magnet, Adhesive
Secondary material: Magnet, Adhesive
technical information
The Hanger Kit for Newport Pop Up is the ideal solution to configure or renew the front graphic of your Newport Pop Up structure, both in straight and curved models. This kit includes the necessary hangers to install a new single-sided graphic quickly and easily. The hangers incorporate double-sided adhesive that facilitates direct fixing of the graphic, ensuring a firm and precise hold. Specifically designed to adapt to each module format, it allows maintaining a professional finish in advertising displays. It is an essential accessory to update the image of your Pop Up without the need to replace the entire structure.
![[Footer] youtube](https://www.cashdisplay.com/cdnassets/socialbanners/youtube.svg)
![[Footer] instagram_01](https://www.cashdisplay.com/cdnassets/socialbanners/instagram_01.svg)
![[Footer] applepay](https://www.cashdisplay.com/cdnassets/pagobanners/apple_pay-_.svg)
![[Footer] googleplay](https://www.cashdisplay.com/cdnassets/pagobanners/google_pay-.svg)
![[Footer] visa](https://www.cashdisplay.com/cdnassets/pagobanners/visa.svg)
![[Footer] mastercard](https://www.cashdisplay.com/cdnassets/pagobanners/mastercard.svg)
![[Footer] bizum](https://www.cashdisplay.com/cdnassets/pagobanners/bizum.svg)